Phone Call From Gate
When a person presses the call button at the gate the #1 administrator will receive a phone call from the
front gate.
If they do not answer it will roll to the #2 and then to the #3.
______________________________________________________________________________________
In order to open the gate through Relay 1 (this is the primary relay that is normally hooked to the
gate opener) the administrator should press:
*0#
_________________________________________________________________
In order to open a secondary device through Relay 2 (this is the relay that is normally hooked to a pedes-
trian gate lock or other device) the administrator should press:
*1#
In order to disconnect the call from the gate without opening the gate (this would be if you did not want to
let the person in) the administrator should press:
*4#
This can also be used before hanging up after opening the gate to be sure that the network doesn’t hold the
call from the gate and waste minutes.
Comments to this Manuals