Estate Swing User Manual download pdf (Page 5)

Power Connection & Sim Card:

Low voltage power connection:

• Verify the On/Off switch is in the OFF position (LEFT)

• In the bottom of the box you will see a red and black wire attached to a round connector. You will

utilize this connector for your low voltage connection. Cut the red and black wire about 2 - 3 inches

from the round connector.

• Using low voltage wire (16-20 gauge stranded direct burial 2 conductor) up to 500 feet connect the red

wire of the connector to the positive and the black to a negative of a 12 - 24V DC transformer. The

wire connections can be made using wire nuts inside the control box.

• Plug in the back up battery (upper right side of board, white connector) and plug in the round low

voltage connector.

• Do not turn the On/Off switch

to On until specified by the

directions.

SIM Card:

• Slide back the SIM door and lift

it up

• Slide the SIM card into the

SIM door making sure that the

clipped corner of the SIM card

lines up with the clipped corner of

the SIM holder

1 2 3 4 5 6 7 8 9 10 ... 16 17

No comments

Estate Swing User Manual Page 5