System 600aUSER MANUAL
CURVESFigure 3. System 600A. Anechoic response. LF contour ON & OFFFigure 4. System 600A. Effect of HF contour on anechoic response.
TECHNICAL SPECIFICATIONSSystemFrequency response (± 3 dB) Free space 44 Hz - 20 kHzMaximum SPL (peak @ 1 m) 107 dB SPLMaximum SPL at mix position (one
Declaration of ConformityThe following apparatus is/are manufactured in the United Kingdom by Tannoy Ltd ofRosehall Industrial estate, Coatbridge, Sco
ContentsINTRODUCTION 1OPERATING INSTRUCTIONS 1Unpacking and visual checks 1Preliminary recommendation 1Installing and connecting the system 2Controls
INTRODUCTIONThank you for purchasing the Tannoy System 600A Active Monitor.The System 600A is a very compact, active near-field reference monitor. Usi
the monitors should be mounted on a rigid structure, preferably with the use of soft pads(rubber, Sorbothane, Blu-Tak etc..).When used in the landscap
If the source itself has a balanced output, use shielded twin conductor cable(microphone cable) connecting pin 2/T to pin 2/T, pin 3/R to pin 3/R, and
SYSTEM DESCRIPTION AND PHILOSOPHYA loudspeaker design naturally splits into various parts: cabinet, lower frequency, higherfrequency, and crossover wh
attention paid regarding the sculptured front panel to provide smooth, rounded edgeswhich minimise side diffractions.Another problem involved in cabin
SERVICINGCabinet finish.To remove marks and scuffs, use a medium soft brush. If necessary, a little warm waterand detergent can be used, but under no
Amplifier.A fuse is located just under the mains input (location 3 in figure 1). Replacement issimple and a spare fuse is provided inside the fuse hou
Comments to this Manuals